미루아저씨

How To Make A Headset Cup Press/Install Tool

0 2 미루아저씨 3 일 17 시간 전



This is my homemade bearing cup press. It works similar to the Park Tool HHP-3 to install the bearing cups into the head tube of a bike frame. It cost less than $8 to make. So relatively cheap to build. It was made from a 12 inch piece of 1/2″ threaded rod, 4-6 fender washers, 2 nylon washers, 2 flat washers and 2 flange nuts. I also demonstrate how to use the tool.

Here is the tool made by Park Tool:
http://www.amazon.com/exec/obidos/ASIN/B000VY33TA/ref=nosim/youtube25-20

Of course, if you want the really nice shop grade version:
http://www.amazon.com/exec/obidos/ASIN/B000R2JJLW/ref=nosim/youtube25-20

**If the video was useful or interesting please give it a “thumbs up” and consider subscribing.

-Website: http://www.RJTheBikeGuy.com
-Facebook: https://www.facebook.com/RJTheBikeGuy
-Subscribe Here: http://www.youtube.com/subscription_center?add_user=shyflirt1
-YouTube Channel: https://www.youtube.com/RJTheBikeGuy

source

댓글목록

댓글을 작성하려면

댓글을 작성하려면로그인 또는회원가입을 해주세요.

이 주제와 연관된 주제